We know you expect nothing less when the lives of your family are at stake. This alarm is interconnect compatible with the following alarms and accessories: ·Smoke alarms: , , , , PE, PI, KN-COSM-IB. ·Heat alarm: HDF. ·CO alarms: KN-COB-IC, KN-COP-IC. ·Relay modules: X, SMX, COX. Kidde Alarms: If you look at the back of the alarm, you will see the name of the product and the model number in bold text below the logo. Firex Alarms: If you look at the back of the alarm, you will see where the text is split into two columns, with text on the left and text on the right. Refer to the User Guide supplied with each Kidde product for interconnect compat-ible models, brands, and devices. Refer to the wiring instructions in section 3 for NFPA initiating device limits. For model: iA P/N EN Rev. H iA For your convenience, write down the following information. If you call.
0 I have the same problem occasionally with my Kidde 's. After some frustration replacing batteries, hitting the test and hush buttons, etc., I noticed that the manual says that after the "hush" button is pressed the detector should silence but will continue to "chirp every seconds for approximately 7 minutes.". Kidde smoke alarm model manual The Kidde is an AC/DC powered, ionization smoke alarm that operates on a V power source with 9V battery backup. This alarm uses ionization sensing technology. The smoke alarm shall be Kidde Model iA or approved equal. It shall be powered by a VAC, 60Hz source along with a 9V battery backup. The unit shall incorporate an ionization sensor with nominal sensitivity of to%/ft.
RF-SM-ACDC Wireless Smoke Alarm (Hardwire with battery back-up) Thank you for purchasing a Kidde Wireless Interconnect smoke alarm. As soon as it installed it started chirping. I ran through a bunch of tests to see if it was an error on my part. I reconnected all wires, made sure nothing was. User Guide P/N EN 11/ There are situations where a smoke alarm may Your Kidde Smoke/CO Alarm was designed to detect both.
0コメント